The Siglite Glass road stud is designed for use on all major roads where a bright durable road/lane delineation product is required. It is a particularly useful product when installed at mini roundabouts and traffic islands.
- Full 360 retro reflectivity
- Low profile above road surface
- Self cleaning
- No maintenance or need to remove for resurfacing
- Highest Impact and compressive strength—ensuring retained reflectivity and extreme durability
- Robust in heavy trafficked situations
Using traditional vehicle mounted milling equipment with transverse and depth controls – shape an appropriate slot in the carriageway.
Dispense sufficient stud grout adhesive at the recommended temperature for the stud to be placed evenly. Install the Siglite Glass road stud at the correct level into the carriageway.
The road can be opened to traffic as soon as the adhesive has set.
Embedded Permanent P1A PRP1 Road Stud.
IS EN 1463-1:2009 IS EN 1463-2:2000
The following is a set of ratings and codes as published in the BSI Declaration of Test Results.
Siglite 19 P1A, H2, HD1, PRP1, NCR1, S1, R1
Siglite 14 P1A, H1, HD1, PRP1, NCR1, S1, R1
|Style of Studs
|Type of Stud
|Glass Embedded Road Stud
|Dimension – height
|Siglite 19 / 14
|Dimension – horizontal
|Diameter – 100mm
|Reflective Performance as New- min 20 mcd/lux/m²
|Colour of Reflected Light
|ROAD TRIAL PERFORMANCE
|Retention on Trial-Pass rate 90%
|100 % Retention
|Reflective PerformancePass Rate 20 mcd/lux/m²